关键词: 一体化污水处理设备,小型污水处理设备
全国咨询电话
13573670168
产品中心
PRODUCT CENTER

新闻资讯

当前位置:主页 > 新闻资讯 >

进出线电缆双头螺杆外面与绝缘塞连接处(地埋式电缆对接箱)

电缆分支箱按照结构形式和电缆接头种类的不同可分为美式电缆分支箱、欧式电缆分支箱和带开关的电缆分支箱三种顾名思义,高压电缆对接箱就是容纳高压电缆接头的箱体,而高压电缆分接箱则是容纳多个高压电缆分支接头的箱体MARPOL73/78附则V-防止船舶垃圾污染规则,有指出什么样的垃圾可以焚烧Procedure for ships waste via Marine incineratorWa实验室污水处理一体机ste incinerationonboard sea going ships is regulated by IMO MARPOL 73/78 Resolution MEPC.176(58),adopted 10 October 2008 and IMO MARPOL Annex VI, Chapter III Regulation 16 andAppendix IV – Requirements for Control of Emissions from Ships – ShipboardIncineration. All new Incinerators installed onboard a ship on or after 1stJanuary 2000 require compliance with the above regulations and shall have IMOType Approved Certificate.。

It is prohibited toincinerate: ? Residues of cargoessubject MARPOL Annex I, II, III? Garbage containingheavy metals, defined in Annex V? Refined petroleumproducts containing halogens? Sewage sludge andsludge oil either of which are not generated onboard the shipP一般诊所专用污水处理器olyvinyl chlorides (PVCs) can only be incinerated in IMO typeapproved incinerators. In accordance with the Helsinki Convention, all shipsare prohibited to use their incinerators whilst in the Baltic Sea area. SeeAttached “Clean Seas Guide Baltic States” for an overview of the regulationsgoverning this area.。

? Minimum flue gastemperature is 850 degrees Centigrade.? The unit shall reach600 degrees Centigrade within 5 minutes after start up.? Monitoring of flue gasoutlet temperature required.? Owners must decide onthe number of hours per day that the Incinerator should be allowed to work.Generally 8-12 hours per day.首先电缆分支箱应该是先将进线电缆穿入(靠高压套管处),方可穿入出线电缆做实验室污水处理一体机分之箱电缆头和普通电缆终端头一样,先将电缆三指套做好,绝缘管缩好,然后依照电缆T型头附件里靠尺剥切外半导电层,剥切电缆绝缘层及依照端子深度拨切电缆后,用电缆清洁纸清洁,刮去导电颗粒,均匀地涂抹绝缘硅脂膏后将三相的应力管套入电缆,然后清洁应力管表面,涂抹绝缘硅脂膏,套入T型头,清洁电缆分支箱绝缘套管,涂抹硅脂膏、套入至绝缘套管,再重复以上工作于出线电缆侧,接着套入分支箱专用避雷器,接着用绝缘塞封堵。

XML 地图 | Sitemap 地图